Operating Instructions

 

For optimum results, completely fill the water bottle with water and place the filter back in the bottle and tightly screw the lid back on. Once tightened drink through the mouthpiece as one normally sips through a standard mouth piece of the water bottle. Water flow can be aided by squeezing the AquaSafeBottle+ whilst drinking.

While the water bottle is in continuous use refill as necessary. To store the product, once the product is thoroughly dry, store the product in dry and cool conditions.

Note:The AquaSafeBottle+ is not designed to remove chemical contaminants, heavy metals contained in water.

 

 

 

The capacity of the AquaSafeBottle to filter water depends on the quality of water to be filtered. In addition the following conditions must be met for effective use of the AquaSafeBottle. To be stored in cool and dry conditions;
Not to be used on water above 35 °C or below 2°C. Not to be damaged through tapping or heavily shaken, nor placing sharp objects inside the unit as it may damage the filter. Regularly wipe the exterior of the AquaSafeBottle mouthpeice with an anti-bacterial wipe after use, do not use if tip is still wet from the wipe.

Should the product not be reused within 5 days, the product should be cleaned and stored